|
|
|
Prod. No. | 350116 |
Length / dia. (at knock guard) | 350 mm / 122 mm |
Voltage | 230 V / 50 Hz (other voltages also available) |
Output | 3400 W |
Temperature | 25 - 600℃ |
Display mode | LED segment display |
Airflow regulation | continuous |
Airflow rate | 800 l / min. max.. |
Delivery nozzle | 50 mm dia. |
Motor life | 20 000 hrs. |
Heater life | approx. 500 – 800 hrs. |
Mains power cord | H07 RN-F 2 x 1.5 |
Weight (without power cord) | 1190 g |
|
The intelligent motor and temperature control automatically matches speed to the temperature selected. |
|
The control curves for airflow and temperature differ according to gun and nozzle attachment used. |
|
|
Regulator and easy-to-read LED segment display Laminating a wing flap with carbon for the Airbus A320 |
|
|
|
Ideal for welding plastic tarpaulins |
HG 5000 E ( 3400W ) |
Ideal for welding bitumen |
|
|
|
Ideal for welding plastic |
The heating element in both hot air guns can be changed in a matter of seconds. |
Each replacement heating element contains a chip with your own specific data allowing the unit's control system to conduct a precision self-calibration cycle. |
|
|
Flat angled nozzle 74 x 3 mm | Flat nozzle 70 x 10 mm |
Prod.No. 092818 | Prod.No. 092719 |
For welding overlapped plastic sheeting | For concentrating the flow of air |
SIEVE REFLECTOR NOZZLE 150x100mm | SHELL REFLECTOR NOZZLE 250x45mm |
Prod.No. 011901 | Prod.No. 011918 |
Heat-shrinking plastics | Heat-shrinking plastics |
HINGED REFLECTOR NOZZLE 60x75mm | |
Prod.No. 011895 | |
Heat-shrinking plastics |
Unilaterally supported pressure roller, 50 mm | Hot air gun stand (HG 5000 E, HG 2300 EM and HG 2300 E) |
Prod.No. 093211 | Prod.No. 093501 |
With ball bearing, for applying pressure to edgebands, PVC film etc. | Holds the gun in position for a variety of work processes |